 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NJU6215 Series Low Operating Current Fundamental Quartz Crystal Oscillator IC !GENERAL DESCRIPTION The NJU6215 series is a C-MOS quartz crystal oscillator IC realized excellent frequency stability for fundamental (up to 60MHz) oscillation, and consists of an oscillation amplifier, 4-stage divider, 3-state output buffer and a built-in LDO. The operating voltage is from 1.62V to 3.63V, and the LDO holds down the characteristic change of the oscillation amplifier for operating voltage variation, and has been stabilized oscillation frequency. The 4-stage divider generates only one frequency selected of f0,f0/2,f0/4 f0/8 and f0/16 internal circuits is output. The 3-state output buffer is C-MOS compatible of high fan-out. The NJU6215 is suitable for the battery drive application such as cellular phones, because it has achieved low operating current by optimizing the tristate buffer. !PACKAGE OUTLINE NJU6215XC-X !FEATURES "Low Operating Current 1mA typ.@40MHz/1.8V/5pF "Frequency Stability 1ppm@VDD10% "Operating Voltage 1.62 to 3.63V "Maximum Oscillation Frequency Up to 50MHz "4-Stage Divider Maximum Divider f0/16 "Built-in LDO "Oscillation Stop and Output Stand-by Function "3-State Output Buffer "Variable Pull-up Resistance on-Die "Oscillation Capacitors Cg and Cg on-Die "Package Outline Die/Wafer "C-MOS Technology !LINE-UP TABLE Type No. FOUT Internal Connect Short Open N A B B A 2 B A 4 B A 8 B A 16 Cg/Cd 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF !PAD LOCATION Die CONT XTI XTO VSS VDD FOUT !COORDINATES No Pad Name X Y 1 CONT -189 231 2 XTI -189 77 3 XTO -189 -77 4 VSS -189 -231 5 FOUT 215 -231 6 VDD 222 231 Starting Point: Die Center Unit[um] Die Size: 0.70x0.75mm Die Thickness (C-L): 14010um Wafer Thickness (W-L): 14010um Pad size: 90x90um Die Substrate: VSS level A f0 *B f0/2 f0/4 NJU6215 *C *D f0/8 *E f0/16 * Under Development !EXAMPLE OF PART NUMBER 1)NJU6212AW-L FOUT=f0, Wafer Thickness=140um 2)NJU6212CC-L FOUT= f0/4, Die Thickness=140um 2010/04/28 ( 1 / 7 ) NJU6215 Series !BLOCK DIAGRAM VDD Regulator VSS XTO Rf XTI Cg Cd Level Shifter A 1/N Divider B 3-State Buffer FOUT OSC Detector CONT !TERMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Control CONT FOUT Output either one frequency selected of f0, CONT H or OPEN f0/2,f0/4,f0/8 and f0/16 Note1) L Oscillation Stop and High impedance Output XTI Quartz Crystal Connecting Terminals XTO VSS VSS=0V : GND FOUT Frequency Output VDD VDD=1.62 to 3.63V Note1) Refer to the line-up table. !ABSOLUTE MAXIMUM RATINGS (VSS=0V, Ta=25C) PARAMETER SYMBOL RATING UNIT Supply Voltage VDD -0.5 to +7.0 V Input Voltage VIN -0.5 to VDD+0.5 V Output Voltage VO -0.5 to VDD+0.5 V Input Current IIN mA 10 Output Current IO mA 25 Operating Temperature Range Topr -40 to +85 C Storage Temperature Range Tstg -55 to +125 C Note2) If the supply voltage(VDD) is less than 7.0V, the input voltage must not over the VDD level though 7.0V is limit specified. Note3) Decupling capacitor should be connected between VDD and VSS due to the stabilized operation for the circuit. 2010/04/28 ( 2 / 7 ) NJU6215 Series !ELECTRICAL CHARACTERISTICS PARAMETER Operating Voltage Output Frequency Stability SYMBOL VDD df/f VDD10% CONDITIONS MIN 1.62 TYP 1 MAX 3.63 (Ta=25C) UNIT V ppm PARAMETER Operating Current Oscillation Stopping Current Input Voltage Output Voltage Input Current SYMBOL IDD ISTB VIH VIL VOH VOL IIN CONDITIONS A version, f0=50MHz, CL=5pF CONT=VSS, No load MIN (VDD=1.8V,Ta=+25C) TYP MAX UNIT 1.4 1.65 mA 1 uA V V V V uA uA 1.8 0.54 0.18 2.7 0.25 IOH=0.6mA IOL=0.6mA CONT=0.8VDD CONT=0.2VDD 1.26 0 1.62 1.9 0.1 3-state Off Leakage CONT=VSS, FOUT= VDD or VSS 0.1 uA IOZ Current Feedback Resistance Rf 270 k Internal Capacitor Cg fosc=50MHz 9.3 pF Internal Capacitor Cd fosc=50MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 50 MHz Output Signal SYM CL=5pF, @VDD/2 45 50 55 % Symmetry Output Signal Rise 3.2 5.0 ns tr CL=5pF, 0.1VDD to 0.9VDD Time Output Signal Fall 3.2 5.0 ns tf CL=5pF, 0.9VDD to 0.1VDD Time Output Disable time tPOZ CL=5pF, RL=1k 100 ns Output Enable Time tPZO CL=5pF 1 ms Note4) The oscillation frequency range has used NJRC's standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) 2010/04/28 ( 3 / 7 ) NJU6215 Series (VDD=2.5V,Ta=+25C) TYP MAX UNIT 1.8 2.3 mA 1 1.75 0 2.25 4.2 0.3 2.5 0.75 0.25 9.0 0.6 uA V V V V uA uA PARAMETER Operating Current Oscillation Stopping Current Input Voltage Output Voltage Input Current SYMBOL IDD ISTB VIH VIL VOH VOL IIN CONDITIONS A version, f0=50MHz, CL=5pF CONT=VSS, No load MIN IOH=0.8mA IOL=0.8mA CONT=0.8VDD CONT=0.2VDD 3-state Off Leakage CONT=VSS, FOUT= VDD or VSS 0.1 uA IOZ Current Feedback Resistance Rf 270 k Internal Capacitor Cg fosc=50MHz 9.3 pF Internal Capacitor Cd fosc=50MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 50 MHz Output Signal 45 50 55 % SYM CL=5pF, @VDD/2 Symmetry Output Signal Rise 2.2 3.7 ns tr CL=5pF, 0.1VDD to 0.9VDD Time Output Signal Fall 2.2 3.7 ns tf CL=5pF, 0.9VDD to 0.1VDD Time Output Disable time tPOZ CL=5pF, RL=1k 100 ns Output Enable Time tPZO CL=5pF 1 ms Note4) The oscillation frequency range has used NJRC's standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) 2010/04/28 ( 4 / 7 ) NJU6215 Series PARAMETER Operating Current Oscillation Stopping Current Input Voltage Output Voltage Input Current SYMBOL IDD ISTB VIH VIL VOH VOL IIN CONDITIONS A version, f0=50MHz, CL=5pF CONT=VSS, No load 2.31 0 2.97 7.8 0.6 MIN (VDD=3.3V,Ta=+25C) TYP MAX UNIT 2.4 3.0 mA 1 3.3 0.99 0.33 16.0 1.2 uA V V V V uA uA IOH=1.2mA IOL=1.2mA CONT=0.8VDD CONT=0.2VDD 3-state Off Leakage CONT=VSS, FOUT= VDD or VSS 0.1 uA IOZ Current Feedback Resistance Rf 270 k Internal Capacitor Cg fosc=50MHz 9.3 pF Internal Capacitor Cd fosc=50MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 50 MHz Output Signal 45 50 55 % SYM CL=5pF, @VDD/2 Symmetry Output Signal Rise 1.8 3.0 ns tr CL=5pF, 0.1VDD to 0.9VDD Time Output Signal Fall 1.8 3.0 ns tf CL=5pF, 0.9VDD to 0.1VDD Time Output Disable time tPOZ CL=5pF, RL=1k 100 ns Output Enable Time tPZO CL=5pF 1 ms Note4) The oscillation frequency range has used NJRC's standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) 2010/04/28 ( 5 / 7 ) NJU6215 Series !EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS L1 C1 R1 f[MHz] 50 C0 R1[] 18.21 L1[mH] 4.34 C1[fF] 2.34 C0[pF] 0.96 !MEASUREMENT CIRCUITS (1)Operating Current, Output Signal Symmetry, Output Signal Rise/Fall Time (CL=5pF) 1/2VDD VDD XTI XTO VSS FOUT 0.1uF CL=5pF H L 90% 50% 10% tr tf (2)Output Disable Time (CL=5pF,RL=1k) XTI XTO Pulse Generator 50 VDD FOUT 0.1uF RL=1k CONT CL=5pF FOUT 0.2VDD tPOZ VOL CONTV SS (3)Output Enable Time (CL=5pF) Pulse Generator Pulse Generator 50 XTI XTO VDD FOUT 0.1uF CL=5pF CONT 0.8VDD tPZO CONTV SS 50 FOUT VOH 2010/04/28 ( 6 / 7 ) NJU6215 Series [CAUTION] The specifications on this data book are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. 2010/04/28 ( 7 / 7 ) |
Price & Availability of NJU6215
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |